Не удается получить доступ к Apache извне

У меня есть сервер Ubuntu с предустановленными apache2, mssql, php5. Я устанавливаю vTiger CRM, и он доступен на моем локальном хосте и внутреннем IP-адресе.

Но я не могу достичь этого, используя внешний IP. Я проверил все настройки на моем маршрутизаторе, и, похоже, все в порядке.

Это мой netstat -ntlp | grep LISTEN

(No info could be read for "-p": geteuid()=1000 but you should be root.) tcp 0 0* LISTEN tcp 0 0* LISTEN tcp 0 0* LISTEN tcp 0 0* LISTEN tcp6 0 0 :::80 :::* LISTEN tcp6 0 0 :::22 :::* LISTEN 


 eth0 Link encap:Ethernet HWaddr 00:0d:3a:b3:0e:a1 inet addr: Bcast: Mask: inet6 addr: fe80::20d:3aff:feb3:ea1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15216 errors:0 dropped:0 overruns:0 frame:0 TX packets:16493 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10379793 (10.3 MB) TX bytes:7676670 (7.6 MB) lo Link encap:Local Loopback inet addr: Mask: inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1414 errors:0 dropped:0 overruns:0 frame:0 TX packets:1414 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:208812 (208.8 KB) TX bytes:208812 (208.8 KB) 

apache2 ports.conf

 Listen 80 <IfModule ssl_module> Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> 

Порт tcpdump -i eth0 80

 19:08:55.678954 IP > Flags [.], ack 1, win 229, options [nop,nop,TS val 27278000 ecr 783042300], length 0 19:08:55.679007 IP > Flags [P.], seq 1:204, ack 1, win 229, options [nop,nop,TS val 27278000 ecr 783042300], length 203 19:08:55.729432 IP > Flags [.], ack 204, win 513, options [nop,nop,TS val 783042305 ecr 27278000], length 0 19:08:55.729458 IP > Flags [P.], seq 204:646, ack 1, win 229, options [nop,nop,TS val 27278013 ecr 783042305], length 442 19:08:55.731846 IP > Flags [P.], seq 1:188, ack 646, win 511, options [nop,nop,TS val 783042305 ecr 27278013], length 187 19:08:55.731878 IP > Flags [.], ack 188, win 237, options [nop,nop,TS val 27278013 ecr 783042305], length 0 19:08:55.732685 IP > Flags [F.], seq 646, ack 188, win 237, options [nop,nop,TS val 27278014 ecr 783042305], length 0 19:08:55.733574 IP > Flags [F.], seq 188, ack 647, win 511, options [nop,nop,TS val 783042306 ecr 27278014], length 0 19:08:55.733587 IP > Flags [.], ack 189, win 237, options [nop,nop,TS val 27278014 ecr 783042306], length 0 19:09:20.850089 IP > Flags [S], seq 718277970, win 29200, options [mss 1460,sackOK,TS val 27284293 ecr 0,nop,wscale 7], length 0 19:09:20.850513 IP > Flags [S.], seq 228035263, ack 718277971, win 8192, options [mss 1460,nop,wscale 8,sackOK,TS val 783044817 ecr 27284293], length 0 

cat /etc/apache2/sites-available/vtiger.stuffex.com.ua.conf

 <VirtualHost *:443> ServerAdmin a.redko@stuffex.com.ua DocumentRoot /var/www/html/vtiger.stuffex.com.ua/ ServerName vtiger.stuffex.com.ua ServerAlias www.vtiger.stuffex.com.ua SSLEngine on SSLCertificateFile /etc/apache2/ssl/server.crt SSLCertificateKeyFile /etc/apache2/ssl/server.key <Directory /var/www/html/vtiger.stuffex.com.ua/> Options FollowSymLinks AllowOverride All </Directory> ErrorLog /var/log/apache2/vtiger.stuffex.com.ua-error_log CustomLog /var/log/apache2/vtiger.status.com.ua-access_log common </VirtualHost> <VirtualHost *:80> ServerName vtiger.stuffex.com.ua Redirect permanent / https://vtiger.stuffex.com.ua/ </VirtualHost> 


 # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.4/ for detailed information about # the directives and /usr/share/doc/apache2/README.Debian about Debian specific # hints. # # # Summary of how the Apache 2 configuration works in Debian: # The Apache 2 web server configuration in Debian is quite different to # upstream's suggested way to configure the web server. This is because Debian's # default Apache2 installation attempts to make adding and removing modules, # virtual hosts, and extra configuration directives as flexible as possible, in # order to make automating the changes and administering the server as easy as # possible. # It is split into several files forming the configuration hierarchy outlined # below, all located in the /etc/apache2/ directory: # # /etc/apache2/ # |-- apache2.conf # | `-- ports.conf # |-- mods-enabled # | |-- *.load # | `-- *.conf # |-- conf-enabled # | `-- *.conf # `-- sites-enabled # `-- *.conf # # # * apache2.conf is the main configuration file (this file). It puts the pieces # together by including all remaining configuration files when starting up the # web server. # # * ports.conf is always included from the main configuration file. It is # supposed to determine listening ports for incoming connections which can be # customized anytime. # # * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/ # directories contain particular configuration snippets which manage modules, # global configuration fragments, or virtual host configurations, # respectively. # # They are activated by symlinking available configuration files from their # respective *-available/ counterparts. These should be managed by using our # helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See # their respective man pages for detailed information. # # * The binary is called apache2. Due to the use of environment variables, in # the default configuration, apache2 needs to be started/stopped with # /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not # work with the default configuration. # Global configuration # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the Mutex documentation (available # at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # #ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # Mutex file:${APACHE_LOCK_DIR} default # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 5 # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # HostnameLookups: Log the names of clients or just their IP addresses # eg, www.apache.org (on) or (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog ${APACHE_LOG_DIR}/error.log # # LogLevel: Control the severity of messages logged to the error_log. # Available values: trace8, ..., trace1, debug, info, notice, warn, # error, crit, alert, emerg. # It is also possible to configure the log level for particular modules, eg # "LogLevel info ssl:warn" # LogLevel warn # Include module configuration: IncludeOptional mods-enabled/*.load IncludeOptional mods-enabled/*.conf # Include list of ports to listen on Include ports.conf # Sets the default security model of the Apache2 HTTPD server. It does # not allow access to the root filesystem outside of /usr/share and /var/www. # The former is used by web applications packaged in Debian, # the latter may be used for local directories served by the web server. If # your system is serving content from a sub-directory in /srv you must allow # access here, or in any related virtual host. <Directory /> Options FollowSymLinks AllowOverride None Require all denied </Directory> <Directory /usr/share> AllowOverride None Require all granted </Directory> <Directory /var/www/> Options Indexes FollowSymLinks AllowOverride None Require all granted </Directory> #<Directory /srv/> # Options Indexes FollowSymLinks # AllowOverride None # Require all granted #</Directory> # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.ht"> Require all denied </FilesMatch> # # The following directives define some format nicknames for use with # a CustomLog directive. # # These deviate from the Common Log Format definitions in that they use %O # (the actual bytes sent including headers) instead of %b (the size of the # requested file), because the latter makes it impossible to detect partial # requests. # # Note that the use of %{X-Forwarded-For}i instead of %h is not recommended. # Use mod_remoteip instead. # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements IncludeOptional conf-enabled/*.conf # Include the virtual host configurations: IncludeOptional sites-enabled/*.conf # vim: syntax=apache ts=4 sw=4 sts=4 sr noet 

Что я делаю не так?